📡Guide to connecting OTG in GenFarmer

We also have another type of connection with the device, which is OTG/LAN

OTG stands for On-The-Go, which is a type of direct connection between the device and your PC. First, to connect the device via OTG, you need to connect it through a USB cable first.

Devices connected via USB

Then switch to the OTG section to prepare the settings for the OTG/LAN connection.

At this step, we still need to maintain the USB connection, then set up the port to activate the OTG connection on the device. The port is usually set to 5555, but you can use any port you prefer, as long as the USB cable remains connected. After entering the port 5555, press activate.

After that, your PC must be connected to the same network as the device. To get your IP address, open the connection method and select Properties.

For example, here is the Properties of a network adapter, and what we are interested in is the IPv4 address. In this case, it's 192.168.1.13. Copy this address to use later in the OTG/LAN settings.

Next, to set the network range in GenFarmer, enter the details as shown in the image below, matching the IPv4 Address of your Wi-Fi. In the last two boxes, enter 1 to 255. This means that GenFarmer will scan the network range from 192.168.1.1 to 192.168.1.255. After filling in all the information, press Scan below to find devices that share the OTG/LAN connection.

OTG connection tutorial video: